來源： http://www.cublog.cn/u/10500/showart.php?id=118180

網上流傳著一個<<流媒體Helix Server詳細安裝，配置>>的文章,詳細講解了Helix_DNA_Server_10.1.tar.gz的安裝方法,今天我在RHEL AS 4.2上成功安裝了Helix Server Unlimited v11.0.1.1884 For Linux,這個版本新一些,使用方法也有一點點不同于Helix_DNA_Server_10.1,我把安裝與設置過程記錄了下來,分享一下,但愿不是狗尾續貂.....

Helix Server Unlimited v11.0.1.1884 For Linux 特別版
下載地址: http://www.cncode.com/Download.asp?I...ed11_Linux.rar
(linux公社有Helix_DNA_Server_10.1可下載,不過我喜歡新些的版本)

漢化補丁 下載地址: http://www.helix.cn/download/Helix_A...r_CHS_2.01.rar (解壓密碼: www.helix.cn )

以上兩個文件都是用rar壓縮的,你可以在你的linux中系統裝一個rar_forlinux來解壓,也可以winrar解壓好再到linux系統中使用,我已經解壓好了,解壓后的文件都放在了同一個文件夾內.

下面是安裝過程

    [root@rhel ~]# cd helixserver/
[root@rhel helixserver]# ls
crack  HelixAdministrator  HelixServerUnlimited11_Linux.zip  setup.tar.gz
[root@rhel helixserver]# tar xzvf setup.tar.gz
helix-server-retail-11.01-rhel4-setup.bin
HelixProxyAdmin.pdf
HelixProxyConfig.pdf
HelixServerAdmin.pdf
HelixServerConfig.pdf
[root@rhel helixserver]# ls
crack                 HelixServerConfig.pdf
HelixAdministrator    helix-server-retail-11.01-rhel4-setup.bin
HelixProxyAdmin.pdf   HelixServerUnlimited11_Linux.zip
HelixProxyConfig.pdf  setup.tar.gz
HelixServerAdmin.pdf
[root@rhel helixserver]# chmod +x helix-server-retail-11.01-rhel4-setup.bin
[root@rhel helixserver]# ./helix-server-retail-11.01-rhel4-setup.bin
Extracting files for Helix installation........................

Welcome to the Helix Server 11.0 (11.0.1.1884) Setup for UNIX
Setup will help you get Helix Server running on your computer.
Press [Enter] to continue...

If a Helix Server license key file has been sent to you,
please enter its directory path below. If you have not
received a Helix Server license key file, then this server
WILL NOT OPERATE until a license key file is placed in
the server's License directory.  Please obtain a free
Basic Helix Server license or purchase a commercial license
from our website at http://www.real.com/.  If you need
further assistance, please visit our on-line support area
at http://service.real.com/.
License Key File: []:                              這個是要許可證,可以先放下,等安裝完再將許可證文件放入

Installation and use of Helix Server requires
acceptance of the following terms and conditions:
Press [Enter] to display the license text...             回車,然后....有興趣就讀一讀吧^_^...

Choose "Accept" to accept the terms of this
license agreement and continue with Helix Server setup.
If you do not accept these terms, enter "No"
and installation of Helix Server will be cancelled. 
I accept the above license: [Accept]:                       此處回車默認即可

Enter the complete path to the directory where you want
Helix Server to be installed.  You must specify the full
pathname of the directory and have write privileges to
the chosen directory.
Directory:  [/root/helixserver]: /usr/helixserver       更改安裝路徑



Please enter a username and password that you will use
to access the web-based Helix Server Administrator and monitor.
Username []:                                                           設置遠程管理用戶名


Username []:Password []:                                            設置密碼

Confirm Password []:

Please enter a port on which Helix Server will listen for
RTSP connections.  These connections have URLs that begin
with "rtsp://"
Port [554]:                                此處回車默認即可

Please enter a port on which Helix Server will listen for
HTTP connections.  These connections have URLs that begin
with "http://"
Port [80]:8080                           更改http傳輸端口,為避免和apache沖突,建議更改

Please enter a port on which Helix Server will listen for
MMS connections.  These connections have URLs that begin
with "mms://"
Port [1755]:                               此處回車默認即可


Helix Server will listen for Administrator requests on the
port shown.  This port has been initialized to a random value
for security.  Please verify now that this pre-assigned port
will not interfere with ports already in use on your system;
you can change it if necessary.

Port [11012]:11111                   更改遠程管理訪問的端口,系統默認的有時難以記住,可更改為好記的

You have selected the following Helix Server configuration:

Admin User/Password:    traveller2/****
Encoder User/Password:  traveller2/****
Monitor Password:       ****
RTSP Port:              554
HTTP Port:              8080
MMS Port:               1755
Admin Port:             11111
Destination:            /usr/helixserver

Enter [F]inish to begin copying files, or [P]revious to go
back to the previous prompts: [F]:                       
如果以上設置你沒意見,此處回車默認即可,否則按P重新設置


Copying Helix Server files....
Helix Server installation is complete.

If at any time you should require technical
assistance, please visit our on-line support area
at http://service.real.com/.

Cleaning up installation files...
Done.

安裝完成

[root@rhel helixserver]# ls
crack                 HelixServerConfig.pdf
HelixAdministrator    helix-server-retail-11.01-rhel4-setup.bin
HelixProxyAdmin.pdf   HelixServerUnlimited11_Linux.zip
HelixProxyConfig.pdf  setup.tar.gz
HelixServerAdmin.pdf
[root@rhel helixserver]# cp -a HelixAdministrator/ /usr/helixserver/HelixAdministrator_zh/      這是漢化過程,HelixAdministrator就是最初下載的漢化包解壓得來
[root@rhel helixserver]# cp crack/DistributedLicensing.lic /usr/helixserver/License/              破解過程??^_^
[root@rhel helixserver]#cd /usr/helixserver
[root@rhel helixserver]# mv HelixAdministrator HelixAdministrator_en 
 為默認的英文語言包重命名,這樣做的主要目的是,萬一某一刻你突然感覺英文看著很爽,依然可以將管理界面換回英文
[root@rhel helixserver]# ln -s HelixAdministrator HelixAdministrator_zh/
[root@rhel helixserver]# ls
adm_b_db  default.cfg            HelixAdministrator_zh  Plugins
Bin       default.cfg.old        helixserver.my         Plugins.old
Bin.old   enc_b_db               Lib                    rmserver.cfg
Cache     enc_r_db               Lib.old                rmserver.cfg.old
cdi_b_db  enc_w_db               License                Secure
Commerce  HelixAdministrator     Logs                   slta.cfg
Content   HelixAdministrator_en  master.cfg
[root@rhel helixserver]# ./Bin/rmserver rmserver.cfg &  啟動服務器進程并讓它在后臺執行,
[root@rhel helixserver]# ps -aux |grep rmserver
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.3/FAQ
root      2918  0.1  1.0  7000 2096 pts/0    S    18:17   0:00 ./Bin/rmserver rmserver.cfg
root      2919  7.9 61.5 324136 117592 ?     Ssl  18:17   0:02 ./Bin/rmserver rmserver.cfg
root      2920  0.0  1.0  7004 2100 ?        Ss   18:17   0:00 ./Bin/rmserver rmserver.cfg
檢查服務是否已正常啟動


  

?這時你的流媒體服務器已經正常運行了,可以在遠程進行維護.我是在另一臺WINDOWS機上進行維護的.打開IE(或其他瀏覽器),輸入 http://192.168.213.128:11111/admin/index.html
會提示讓你輸入用戶名和密碼,驗證便可以看到管理界面,并且已經是全中文,如圖




端口設置可在這里隨意更改

HelixServer Unlimited 11 for Linux 細安裝配置 (1)