step1:在界面上添加一個ListCtrl控件,設置其屬性View為值為:Report

Report:相當于資源管理器中的詳細視圖,最頂層有一行為表頭.

step2:添加列:

例如:

    CListCtrl *pCListControl =(CListCtrl *)GetDlgItem(IDC_LT_BLANKCK);
	pCListControl->InsertColumn(0,"Sector No",LVCFMT_CENTER,60);
	pCListControl->InsertColumn(1,"Sector Size (KB)",LVCFMT_CENTER,90);
	pCListControl->InsertColumn(2,"Start Address",LVCFMT_CENTER,90);
	pCListControl->InsertColumn(3,"End Address",LVCFMT_CENTER,80);
	pCListControl->InsertColumn(4,"Status",LVCFMT_CENTER,80);
	pCListControl->InsertColumn(5,"Address",LVCFMT_CENTER,90);
	pCListControl->InsertColumn(6,"Content",LVCFMT_CENTER,90);
  

step3:添加行:

例如:

    void BlankCheckDlg::AddItemToListCtrl(SectorBlankCheckItem * pItem)
{
	CListCtrl *pCListControl =(CListCtrl *)GetDlgItem(IDC_LT_BLANKCK);

	CString strText;
	/*int nColumnCount = pCListControl->GetHeaderCtrl()->GetItemCount();*/

	
	strText.Format(TEXT("%d"), pItem->m_SectorNo);

	// Insert the item, select every other item.
	//sector no
	pCListControl->InsertItem(LVIF_TEXT | LVIF_STATE, pItem->m_SectorNo, strText, 
		(pItem->m_SectorNo % 2) == 0 ? LVIS_SELECTED : 0, LVIS_SELECTED, 0, 0);
	//sector size
	strText.Format(TEXT("%d"), pItem->m_SectorSize);
	pCListControl->SetItemText(pItem->m_SectorNo, 1, strText);
	//start address
	strText.Format(TEXT("0x%08x"), pItem->m_StartAddress);
	pCListControl->SetItemText(pItem->m_SectorNo, 2, strText);
	//end address
	strText.Format(TEXT("0x%08x"), pItem->m_EndAddress);
	pCListControl->SetItemText(pItem->m_SectorNo, 3, strText);
	//blank
	pCListControl->SetItemText(pItem->m_SectorNo, 4, pItem->m_Status);
	//address
	pCListControl->SetItemText(pItem->m_SectorNo, 5, pItem->m_strAddress);
	//content
	pCListControl->SetItemText(pItem->m_SectorNo, 6, pItem->m_strContent);
}
  

這樣就可以完成一張表的制作了.

如下圖:

CListCtrl 列表框控制的使用