久久在线免费,四虎影视1304t,杨幂国产精品福利在线观看

Error on initialization of server mk-worker (stormconf.ser is missing) 2 名作者發布了 13 個帖子

Moshe Bixenshpaner

12-8-10

將帖子翻譯為中文

Hi guys,

I have a simple topology that puts values on a Redis server.

When I deploy it, no client gets to connect Redis, although it works perfectly fine when I run it via LocalCluster.

I attached logs and conf for the nimbus and the supervisors.

The cluster is configured as following:

1GB RAM for the nimbus (192.168.1.22)
1GB RAM for the zookeeper1 (192.168.1.31)
2GB RAM for the supervisor1 (192.168.1.16; 4 workers)
2GB RAM for the supervisor2 (192.168.1.19; 2 workers)

All machines are virtual and have JDK 6u33 x64 installed.

nimbus, supervisor1 & supervisor2 have Storm 0.8.0, ZeroMQ 2.1.7 and the latest JZMQ installed.

zookeeper1 has Python 2.6.6 (with default configuration) and Zookeeper 3.3.6 installed.

I'm not sure this is the entire problem, but I'm getting the following exception on some of my supervisors (in our case - supervisor2):

2012-08-10 08:21:27 worker [ERROR] Error on initialization of server mk-worker

java.io.FileNotFoundException: File '/opt/storm/local/supervisor/stormdist/DistributedSystem-1-1344586762/stormconf.ser' does not exist

at org.apache.commons.io.FileUtils.openInputStream(FileUtils.java:137)

at org.apache.commons.io.FileUtils.readFileToByteArray(FileUtils.java:1135)

at backtype.storm.config$read_supervisor_storm_conf.invoke(config.clj:138)

at backtype.storm.daemon.worker$worker_data.invoke(worker.clj:146)

at backtype.storm.daemon.worker$fn__4316$exec_fn__1206__auto____4317.invoke(worker.clj:331)

at clojure.lang.AFn.applyToHelper(AFn.java:185)

at clojure.lang.AFn.applyTo(AFn.java:151)

at clojure.core$apply.invoke(c ore.clj:601)

at backtype.storm.daemon.worker$fn__4316$mk_worker__4372.doInvoke(worker.clj:322)

at clojure.lang.RestFn.invoke(RestFn.java:512)

at backtype.storm.daemon.worker$_main.invoke(worker.clj:432)

at clojure.lang.AFn.applyToHelper(AFn.java:172)

at clojure.lang.AFn.applyTo(AFn.java:151)

at backtype.storm.daemon.worker.main(Unknown Source)

2012-08-10 08:21:27 util [INFO] Halting process: ("Error on initialization")

The topology I'm trying to run requires 4 workers altogether.
So even if supervisor2 dysfunctions, the other supervisor should be able to run the entire topology on its own.
Am I doing something wrong here?

Thanks,
Moshe.

附件 ( 1 )

logs.rar

38 KB 查看下載

nathanmarz

12-8-13

將帖子翻譯為中文

Are your supervisors sharing a directory over a network mount, by any chance? What happens if you turn off supervisor2 completely? Do topologies launch successfully on the other supervisor?

- 顯示引用文字 -

--
Twitter: @nathanmarz
http://nathanmarz.com

Moshe Bixenshpaner

12-8-14

將帖子翻譯為中文

No, supervisors don't share directories.

They are virtual machines created by kvm though (I'm not sure if it has anything to do with the problem).

If I have enough workers on a single supervisor, everything works perfectly fine.
It seems the coordination between the supervisors is the cause of the problem.

Thanks,

Moshe.

- 顯示引用文字 -

nathanmarz

12-8-14

將帖子翻譯為中文

The error you're facing indicates that the supervisor failed to download the configuration file from Nimbus. Can you show me the results of doing an ls -R on the supervisor local dir for the node that's getting that error? (do it while the topology is active and causing the error – that is, don't shut it down and then do the ls -R).

- 顯示引用文字 -

此帖已被刪除。

Moshe Bixenshpaner

12-8-14

將帖子翻譯為中文

Hi,

I attached the local directory and log files for nimbus and each of the supervisors.

sv2 is the supervisor that fails to load.

Thanks,

Moshe.

- 顯示引用文字 -

附件 ( 6 )

nb-local.tar

366 KB 查看下載

nb-logs.tar

4 KB 查看下載

sv1-local.tar

187 KB 查看下載

sv1-logs.tar

27 KB 查看下載

sv2-local.tar

187 KB 查看下載

sv2-logs.tar

22 KB 查看下載

nathanmarz

12-8-15

將帖子翻譯為中文

I would need you to do the ls -R while the error is happening and the topology is still active.

- 顯示引用文字 -

Moshe Bixenshpaner

12-8-15

將帖子翻譯為中文

This is exactly what I did (only I attached a tar file or the entire local directory, instead of just attaching the output from an ls -R).

- 顯示引用文字 -

nathanmarz

12-8-17

將帖子翻譯為中文

I don't quite understand – you said you did the ls -R a few days after the exception happened.

- 顯示引用文字 -

Moshe Bixenshpaner

12-8-17

將帖子翻譯為中文

I deleted that post, the one I posted eventually was after I reset everything, reproduced the whole thing and attached logs and contents of local directories.

- 顯示引用文字 -

nathanmarz

12-8-17

將帖子翻譯為中文

The sv2 logs don't show any exceptions.

- 顯示引用文字 -

Moshe Bixenshpaner

12-8-26

將帖子翻譯為中文

Hi Nathan,

Log files of both SV2 workers show the logs show java.io.FileNotFoundException: File '/opt/storm/local/supervisor/stormdist/DistributedSystem-1-1344956702/stormconf.ser' does not exist followed by Halting process: ("Error on initialization") .

On another note, the ZK1 log shows that clients are disconnecting every few seconds.

- 顯示引用文字 -

Moshe Bixenshpaner

12-8-26

將帖子翻譯為中文

Hey guys,

Problem is solved.

There were actually two of them:

1. The documentation specify to use a specific version of ZeroMQ, JZMQ, Python and JDK but doesn't specify anything about the Zookeeper, I assumed I can use the newest version (3.3.6) but it turned out to be a bad move. After a week with poor performance,I checked the jars attached to Storm 0.8.0 and I saw that it is aimed for Zookeeper 3.3.3.

2. I'm not sure how it is with real clusters, but on virtual cluster you need to have each node specified in the /etc/hosts file of all other nodes - pay attention to the following form:

ip_address host_name.defaultdomain

Notice the .defaultdomain at the end of each host name - this was what actually solved the problem of having a cluster of supervisors working together simultaneously.

- 顯示引用文字 -

Error on initialization of server mk-worker (stormconf.ser is missing)

更多文章、技術交流、商務合作、聯系博主

微信掃碼或搜索：z360901061

微信掃一掃加我為好友

QQ號聯系： 360901061

您的支持是博主寫作最大的動力，如果您喜歡我的文章，感覺我的文章對您有幫助，請用微信掃描下面二維碼支持博主2元、5元、10元、20元等您想捐的金額吧，狠狠點擊下面給點支持吧，站長非常感激您！手機微信長按不能支付解決辦法：請將微信支付二維碼保存到相冊，切換到微信，然后點擊微信右上角掃一掃功能，選擇支付二維碼完成支付。

【本文對您有幫助就好】元

2元

5元

10元

20元

自定義